Some EFA programs such as BMDP4M and SAS Proc FACTOR return a variables by factors scoring coefficient matrix. I would like to be able to get that matrix for a promax rotated EFA in MPLUS with the WLSMV estimator. Is there any way to get that matrix?
The WLSMV estimator is used with categorical outcomes. Unlike continuous outcomes, with categorical outcomes a factor score coefficient matrix is not used to produce the factor scores. Instead, factor scores for each person have to be estimated by an iterative technique (see Appendix 11 in the Mplus User's Guide).
Anonymous posted on Wednesday, November 29, 2000 - 9:41 am
I'm trying to develop a factor that contains the same items at time 1 and time 2. I'd like to know that the relationships between my factor and items are similar (not significantly different) across time. How do I test this?
bmuthen posted on Wednesday, November 29, 2000 - 10:10 am
You should test that the loadings are invariant over time while allowing factor variances to vary across time. You get the chi-square difference between the model with invariance and the model without invariance. With categorical outcomes, the analysis is a bit more involved. Here you need to hold both loadings and threshold invariant over time, letting factor means and variances vary across time, and letting scale factors vary across time (see the Muthen 1996 paper on growth modeling with binary responses as listed on this web site).
Anonymous posted on Saturday, July 20, 2002 - 7:36 pm
As a followup to the message of Charles Cleland from Jan 31, 2000 concerning the estimation of factor scores using the stated iterative technique:
I understand that a factor score matrix is not possible with categorical data. However, is there a facility in Version 2.1 to output the factor scores for each individual into a dataset using the stated iterative technique, for an EFA model with ordinal (3 level) indicators? Or with binary indicators as mentioned in Appendix 11 of the manual?
Saving factor scores is not an option for EFA. It is an option for CFA for all variable types - continuous, binary, polytomous, and combinations of continuous, binary, and polytomous. If you want an EFA model, you can specify an EFA model in a CFA framework and get factor scores for that.
Anonymous posted on Thursday, July 25, 2002 - 6:27 am
In doing an EFA in a CFA framework, is there any general advice about *which* parameters to be constrained to enable identifiability? For example suppose there are 20 categorical indicators and 3 factors, with all 20 indicators loading on each factor. I recall reading that there needs to be k^2 constraints for a k-factor "EFA in CFA" model, so 9 constraints here. One can fix the 3 latent variable variances at 1, but is there a general rule about how to determine which 6 paths to constrain to enable identifiability?
I don't know of any reference for this, but we recommend selecting one item per factor as an anchor item. Anchor items have high loadings on their factor and low loadings on the other factors. You can fix the loadings of the anchor items for the factors for which they have low loadings to zero. This will give you the remaining six constraints that you need.
Anonymous posted on Wednesday, December 04, 2002 - 12:10 pm
Is it possible to include an identifiaction variable(IDS) with save fscore coommand in mplus version 2? thanks
I am a new user on this program, we purchase this program for the purpose of generating factor scores (EFA model) for binary data in our research project. We were disopinnanted that the manual does not give enough information on this matter.
Can anayone help me on having a sample program in doing EFA in CFA for the purpose of deriving the factor score?
To follow on Yuhchang Hwang's question above, thanks for your fax. But after incorporating the additional constraints into the CFA models, we still can't obtain the factor scores. The results are either "cannot converge" or "The correlation matrix is not positively definite". We made all attempts, but to no avail. Is there any other suggestion? Thanks!
Why don't you send the output and data. I will take a look at it.
Anonymous posted on Thursday, May 27, 2004 - 2:56 am
I have a similar question when doing EFA at CFA framework. From the EFA 4 factor testing, I define 4 Achors for the 4 factors and put in total 4*3= 12 constraints (zero loadings of each achors) and 4 constraints as factor variance to be fixed equal to one, but I still get the following error message:
NO CONVERGENCE. NUMBER OF ITERATIONS EXCEEDED. FACTOR SCORES WILL NOT BE COMPUTED DUE TO NONCONVERGENCE OR NONIDENTIFIED MODEL.
I don't understand why this model is nonidentified because I put in fact 4 square = 16 constraints already. And what's the problem of non convergence?
my second question: when doing 2-level EFA of CFA, should I seperate the two EFA models or I can do pooling model without consider the nest effect?
Thanks a lot!
bmuthen posted on Thursday, May 27, 2004 - 11:09 am
The error message also says NO CONVERGENCE, which means that factor scores will not be computed. The nonconvergence of the EFA within CFA may be due to not giving enough key starting values for the loadings.
I would do Step 1 EFA, Step 3 EFA (pooled-within), as well as EFA on the between matrix.
What you are showing is not giving starting values for each item. You need to give more than 2 starting values. And you need to use the factor loading values from your EFA not the ones I made up. You can choose the largest factor loadings to start.
The number I added after * are the factor loadings from EFA, I did not make them up, they just happen to be around 0.8. I only added starting values for these two because only these two items are loaded on factor one.
I did similarly for factor two and factor three, where I added factor loadings as starting values to those items that loaded on the factors.
I think you understand correctly. You must be doing something else. If you send your input/output and data along with your license number to email@example.com, we can take a look at it. Please also send your EFA output.
Tomason posted on Thursday, April 28, 2005 - 2:47 am
I am a new user of Mplus. I want to do EFA for binary and ordinal responses. My question is how can I get factor scores? Anyone who help me by sending a code? Thank u in advance
Factor scores cannot be saved for EFA only for EFA in a CFA framework or CFA. See Example 12.15 in the Mplus User's Guide to see how to save factor scores. Example 4.2 shows EFA for categorical factor indicators.
Tomason posted on Saturday, April 30, 2005 - 7:11 am
Linda, thanks a lot for your advise. What I did after your comment , first I did EFA and then CFA and saved the factor scores. Am I correct?
bmuthen posted on Saturday, April 30, 2005 - 11:29 am
I think Linda referred to "EFA in a CFA framework" - see the "Day 1" handout from the Mplus Short Courses.
Anonymous posted on Tuesday, May 03, 2005 - 6:38 am
I am a new user of mplus . When I did EFA I got the following message *** ERROR Unexpected end of file reached in data file.
You most likely have blanks in your data and are reading the data as free format. Because of this, Mplus is not finding enough information. If you cannot figure this out, you need to send your input, data, and license number to firstname.lastname@example.org.
I want to do reliability assessment using factor analysis. The measurements are taken at two time points and all the measurements are binary and polytomous. How can I do it? May you suggest me some reading further?
I am not sure if you want to know the reliability of an item, or how well a factor is measured, or using the factor model to find out the reliability of the sum of the items.
In the first case, you can think of item reliability as the variance proportion of y* that is explained by a factor, where y* is an underlying continuous latent response variable. You get that from the Mplus output when requesting a standardized solution.
In the second case, you want to find the precision with which a factor score is estimated - you find writings on this in the IRT literature under information functions.
In the third case, you need to do some statistical calculations.
Thx Bmuthen. My idea is to see whether an items are reliable when they measured at two time points from same persons.It's like test-retest method.If you have further suggestion,that is highly appreciated.
We don't do this because when someone extracts, for example, 1 through 8 factors, it would result in a lot of factor scores. There will be a new feature in Version 5.1 that will allow factor scores for an EFA model.
Thank you for your response and I am looking forward to the next version with this new feature. In the meantime I plan to use EFA within a CFA framework to output factor scores (as suggested in a prior post). Would you expect factors scores from an EFA within a CFA framework to be fairly similar to factor scores from an EFA?
I am new to Mplus, but have used Proc Calis in SAS. I see from the above discussion on factor scoring coefficients that these coefficients are not available when using WLSMV, but what about when using ML with a continuous outcome. How would I get the factor scoring coefficients?
See formula 226 of Technical Appendix 11 which is on the website.
abdul jalil posted on Tuesday, July 29, 2008 - 12:06 am
Hi, i want to know that to derive factor scors that can further be used for multiple regression analysis, factor analysis will be applied only to those variables that are independent or dependent variables are also included to derive principal factors. i need complete logical reason for an accurate stretegy
I am running an EFA with categorical outcome variables and trying to save factor scores. On 4/28/2008 L. K. Muthen wrote that version 5.1 would allow for saving factor scores in an EFA model but I am running version 5.2 and still got the error message *** WARNING in SAVEDATA command Factor scores cannot be computed for analysis types BASIC or EFA. Request to save FSCORES is ignored.
Did I do something wrong or is this not possible without the EFA in a confirmatory framework mentioned above?
I successfully conducted an EFA and had no convergence problems. However, when I specified one of the factor solutions from the EFA (which had no problems in the EFA and was a good fit) in an Exploratory SEM model to get the factor scores I could not get the model to converge. The solution was non-positive definite. Do you have any idea what I may be doing wrong? Thank you.
It sounds like the 1-factor model in the context of a larger SEM has a problem. That can happen if the correlations between the factor indicators and these other SEM variables are not specified correctly. Can't say anything more specific without knowing more.
Holly Burke posted on Saturday, June 23, 2012 - 10:57 am
Hello Dr. Muthen,
Thank you for your response. I did not add any other variables to the ESEM. I only did the ESEM to get factor scores (since my variables are categorical) from the three factor solution I found acceptable from the EFA. Here is my EFA code:
ANALYSIS: TYPE = COMPLEX MISSING; ROTATION = QUARTIMIN;
Here is my ESEM code (using the same 11 variables with the same data):
I am not sure what I am doing wrong, but the EFA 3-factor solution converges and has good fit, but the ESEM solution does not work (THE RESIDUAL COVARIANCE MATRIX (THETA) IS NOT POSITIVE DEFINITE...FACTOR SCORES WILL NOT BE COMPUTED DUE TO NONCONVERGENCE OR NONIDENTIFIED MODEL.)
Is it possible to request scoring coefficients in ESEM with categorical indicators? I am able to get factor scores using ESEM, but would like to get the scoring coefficients instead in order to apply them to another data set. Thank you.
Sorry, I think I wasn't clear in my previous post. I am hoping to get scoring coefficients for an EFA using ML estimation on continuous variables, and then apply these scoring coefficients to raw data. My question is: where might I find information for applying scoring coefficients to raw data in Mplus? I do not want the factor scores because I will be applying the scoring coefficients to a separate data set. Thanks again.