Message/Author 


I'd like to control for age in my SEM model  would I use WITH to do this? Also, if I do use WITH to control, is there one line of syntax that controls for age in the entire model or do I have to include a line in for each construct or variable? 


One controls for a variable by using it as a covariate in a regression. The ON option is used for regression. You should include age as a covariate in all ON statements. 


I understand I need to control for my control variables (age and sex) on each line, but what does that look like? If I have all observed data: IV BY DV IV BY DV DV2 DV3 How do I include age and sex as a covariate? 


If you factor is iv, the BY statement should be IV BY DV DV2 DV3; You don't need the extra IV BY DV. Then you can regress iv on the covariates: iv ON age sex; 


Dear Drs Muthen: I have 2 questions related to a covariate: 1) I want to include Age as a covariate in my SEM models. Age only correlates with some variables in my model, so I'm only featuring it in some lines of my Mplus code. For example: UDO ON SC Age; HS ON SC UDO; PD ON SC UDO HS Age; This is okay to do, right? I see above you stated "You should include age as a covariate in all ON statements". 2) Also, even if MPlus automatically correlates Age with my main exogenous variable (here, SC), I would like to get the value of that path in the output. How do I ask for that? If I add a "WITH" line, some of the values (eg, the AIC) change... Thanks! 


Another control variable question while I'm at it: What if I want to have a control variable that does not correlate with the main exogenous variable? For example, I have syntax like so for one model: udo ON sc age hs ON udo sc pd ON hs udo sc age I do not want MPlus to assume there should be covariance between SC and age. Is there anything I can do about this? Thanks again! 


I would recommend handling the covariates by the Mplus default, namely that they are all correlated. Their correlation values can be found by using SAMPSTAT. Those correlations are not part of the model. The only exception I would make in this regard is if you have strong theoretical reasons for zero correlations, for instance with a randomized study where the tx variable is uncorrelated with a pretest, but even then it is not necessary. What you should not do is to look at the sample correlations and for almost zero sample corr's fix those corrs at zero in the model. Including a correlation that is almost zero does not hurt. When you start using WITH among covariates, they change status in Mplus and are include among the list of DVs and therefore BIC/AIC change. 

Karen Kegel posted on Thursday, June 06, 2013  11:29 am



Thank you so much for your help. To clarify, you are saying that by default, MPlus includes covariance/correlation between a control variable and an exogenous variable. For one of my models, I absolutely need to this covariance/correlation to be contributing to model fit, path coefficient results, etc. This is because I am comparing it vs other models where I have a predictor path running from Age to UDO. When moving UDO to become the main exogenous variable for one model, this predictor path needs to get turned into an explicit covariance path. If you are saying that such a covariance/correlation is NOT part of model results, is there a way to explicitly and accurately indicate covariance between a control variable and the exogenous variablebesides using a WITH statement? Sorry if this sounds confusing. Thanks so much again for your time! 


If you want some covariates (say x1, x2) to be part of the model to be estimated (and to be evaluated for fit), you include them in the model by saying one of the following: x1 x2; [x1 x2]; x1 WITH x2; 

Estee posted on Tuesday, March 04, 2014  11:20 am



Dear Dr. Muthen, I need advice on mplus syntax if I want to include control variables in a mediation model. Let's say if I have 1 independent variables (IV), 1 dependent variables (DV) and 2 mediators in a SEM model (M1&M2). The syntax I used is: ANALYSIS: BOOTSTRAP = 5000; MODEL: IV BY a1 a2; DV BY b1 b2; M1 BY c1 c2; M2 BY c3 c4; !Direct Relationship between IV and DV DV ON IV; !Relationship between IV and Mediator M1 ON IV (P1); M2 ON IV (P1); !Relationship between DV and Mediator DV ON M1 (P3); DV ON M2 (P4); MODEL INDIRECT: DV IND IV; DV IND M1 IV; DV IND M1 IV; MODEL CONSTRAINT: NEW (IVM1DV) = P1*P3 NEW (IVM2DV) = P2*P4 !PAIRWISE CONTRAST NEW (CON)= IVM1DV  IVM2DV; 

Estee posted on Tuesday, March 04, 2014  11:21 am



** Continued from the previous post I have three control variables to be added. They are gender, father's education level and mother's education level. From previous posts, I learnt that control variables/covariates are added in ALL ON statements. As there are missing value in my covariates, I need to bring all of the covariates into the model by mentioning their variances in the MODEL command. So, is the following syntax correct? ANALYSIS: BOOTSTRAP = 5000; MODEL: Gender FEdu MEdu; IV BY a1 a2; DV BY b1 b2; M1 BY c1 c2; M2 BY c3 c4; !Direct Relationship between IV and DV DV ON IV Gender FEdu MEdu; !Relationship between IV and Mediator M1 ON IV Gender FEdu MEdu (P1); M2 ON IV Gender FEdu MEdu (P1); !Relationship between DV and Mediator DV ON M1 Gender FEdu MEdu (P3); DV ON M2 Gender FEdu MEdu (P4); MODEL INDIRECT: DV IND IV; DV IND M1 IV; DV IND M1 IV; MODEL CONSTRAINT: NEW (IVM1DV) = P1*P3 NEW (IVM2DV) = P2*P4 !PAIRWISE CONTRAST NEW (CON)= IVM1DV  IVM2DV; Also, do I need to add the control variables into the MODEL INDIRECT? Your guidance is very much appreciated. Thank you very much. 


This would appear to be correct. Please note that posts to Mplus Discussion should not exceed one window. Please follow that in the future. 

Estee posted on Wednesday, March 05, 2014  10:24 am



Thank you very much. I apologize for the the previous post which exceeded one window. I have a question regarding moderated mediation. In a moderated mediation model, are control variables allowed to be included? For example, gender is tested as a moderator in the mediation model while family income and father education level are controlled in the model. 


Yes. 

Yvonne LEE posted on Saturday, August 02, 2014  6:28 pm



I am doing SEM with WLSMV estimation. After adding social desirability (MC_C) as a control variable to the outcome variable (SES0123), the output on the standardized indirect effect section only shows the estimates without the S.E., pvalue and cinterval. Is this normal? How to obtain the cinterval of the standardized indirect effect? 


You are using an older version of Mplus where standard errors for standardized parameter estimates are not available for conditional models. Update to Version 7.2. 

Yvonne LEE posted on Thursday, August 07, 2014  5:58 am



I am a selflearner of Mplus, therefore would like some confirmation to make sure I do it right. 1. Social desirability is a covariate in my study. I first add social desirability (SoDesir) to the DV in SEM with the command 'DV ON SoDesir' in order to make social desirability a control variable in my model. Is the command correct? 2. Model modification indices then suggest me to add a path between social desirability and an IV for model improvement. I then add 'IV on SoDesir'. Is this proper? Does this mean social desirability is now controlled for both DV and IV? 3. To develop a model in SEM, should I construct a model with good fit and then add the social desirability control variable? Or, I add the social desirability control in the first place? I learn that the control variable will not be included in model estimation in any way. 

Yvonne LEE posted on Thursday, August 07, 2014  6:48 am



sorry, left one question. 4. Can we add the social desirability control variable to latent factor apart from the observed indicator? The modification indices do suggest but I wonder what it means. 


You should listen to the Topic 1 course video on the website. Only dependent variables go on the lefthand side of the ON statement. Independent variables and control variables go on the righthand side of the ON statement. Covariates can be observed variables or latent variables. 

Shiny posted on Thursday, August 14, 2014  4:07 am



I am running a sequential full Mediation model. that is: xm1m2y. y is a categorical data. now I d like to add one control variable c. I want to test whether the Mediation effect still exists when control is added and also how it infuences the Regression coeffient of m1 on x. what i did in mplus is as follow: DATA: FILE IS dataset1.dat; VARIABLE: NAMES ARE x c m1 m2 y; CATEGORICAL = y; ANALYSIS: BOOTSTRAP = 5000; ESTIMATOR = WLSMV; PARAMETERIZATION=THETA; MODEL: y ON m2 (c); m2 on m1(b); m1 on x(ax); m1 on c(ac);! c is a control variable MODEL CONSTRAINT: NEW(axb axc axbc acb acc acbc); axb = ax*b; axc = ax*c; axbc =ax*b*c; acb = ac*b; acc =ac*c; acbc =ac*b*c; OUTPUT: TECH1 STANDARDIZED CINTERVAL(BOOTSTRAP); My questions are: 1.if i want to check the Impact of control variable (c) on the main Mediation effect (xm1m2y), can I just Regress m1 on c, and skip the Regression of m2 and y on c? 2. is it up to me to decide whether an indirect effect between control variable and y shall be tested? or actually I shall only do Regression test involving DV and control? 3. In the Output, the control variable (c)and IV (x) is covariated as Default. Do they Need to be covariated or can I remove the covariate? Many thanks! 


1. Only if the model fits well without y m2 on c; 2. Theory and testing should decide. 3. A good neutral stance is to let them be correlated which Mplus does automatically (not a parameter estimated in the model). 

Back to top 