Message/Author 

Anonymous posted on Monday, October 03, 2005  3:07 pm



I'm trying to examine a basic multiple group model. However, I am having trouble getting Mplus to constrain all of the parameters of the model to develop the baseline model. I tried the method where a number is placed in parentheses. However, it doesn't appear to constrain the parameters. I also let Mplus do this by default as in part of the model presented in 5.14. I guess I'm lost. Any suggestions as to what I should do to constrain these measures? Thanks in advance. 

Thuy Nguyen posted on Tuesday, October 04, 2005  5:36 pm



Are all parameters not being constrained or just certain ones? With some parameters, like factor means, the equality for the parameter must be given in the groupspecific models for the first group since the special default is applied to the first group so specifying equalities in the overall group doesn't do anything to the parameter for the first group. 

Anonymous posted on Wednesday, October 05, 2005  5:55 am



I have this issue resolved. HOWEVER, I can't seem to get different chisquare corrections when I free some of the parameters. For example, I have a structural model developed, but I am unable to test for difference. I can't perform the formula on the website because the data are weighted and ML will not run with weighted data. I tried the difftest option and it didn't work as well. I'm lost as to what I'm doing wrong. Also, when I use my weights should be observations that N change? Thank you 

bmuthen posted on Saturday, October 08, 2005  2:00 pm



You can use the MLR estimator with weighted data and use the same chisquare difference testing approach as is described on the web site for MLM. 

Jeff Lee posted on Saturday, November 03, 2007  12:01 pm



I am testing measurement model invariance across countries A, B and C. The measurement model is an established fourfactor model with at least 4 indicators measuring each fator. The test results of the unrestricted model shows that all the 7 factor loadings of the first factor in Country C are not significant, indicating the configural invariance does not hold (GFI=0.857, CFI=0.903, RMSEA=0.041). My first question is£º Is it ok to procede and test the latent mean structures with the other 3 configurally invariant factors? Byrne, Shavelson, and Muthen (1989) suggested that at leat 2 indicators' loadings should be set equal across groups if we want to test mean structures, given partial measurement invariance. My second question is: If the factor loadings of 2 out of the 4 factors are completely noninvariant across the 3 countries, while the factor loadings of the other 2 factors are all invariant across the 3 countries, how should I test the invariance of factor variance and covariance and latent mean structures? Thank you very much! 


Although the measurement model is an established one, it may not be correct for your data given that for one factor the factor loadings are not significant for one factor for one country. I would look at each country separately in an EFA as a first step to establish that the same number of factors is best for each group. If so, I would test the measurement model for each country to see if it fits the data for each country. Only then would I attempt to establish measurement invariance across countries. Once you have determined that you have measurement or partial measurement invariance, you can test the equality of the structural parameters using chisquare difference testing of the MODEL TEST command. 

Jeff Lee posted on Friday, November 09, 2007  2:43 pm



I am trying to test latent mean structure invariance of a 5factor model across 3 countries. Each construct is measured with at least 3 indicators. Partial configural invariance is established with only 1 nonsignificant factor loading in facor 1 in Country C. There are 3 indicators in factor 1. None of the 4 factor loadings of factor 3 is invariant while all the factor loadings for the other factors are invariant across 3 countries. Byrne, Shavelson, and Muthen (1989) suggested that at leat 2 indicators' loadings should be invariant across groups if we want to test latent mean structures, given partial measurement invariance. I have no problem with factor 1 because there are 2 invariant indicators across 3 countries and I can freely estimate the indicator that is not significant for Country C. My first question is: How should I handle factor 3 in which no factor loadings are invariant across 3 countries when I test for the invariance of factor variance and covariance? Should I leave the variance and covariances associated with factor 3 freely estimated when I test the structural model invariance? My second question is: Given all the loadings for factor 3 are not invariant, how should I test the latent mean structures? Should I leave the factor loadings, factor variance and covariances associated with factor 3 freely estimated when I test the mean structures? Thank you very much! 


If you cannot establish that the constructs mean the same thing in each country, structural parameters should not be compared. 


I want to conduct multiple group SEM using data from a large sample (approx n = 27000). I have five groups (the smallest group has approx n = 800 and the largest group has approx n = 20000. I have the handout from the Day 1 training course. If I am following the handout correctly, I need to fit each factor model (of which I have 3) separately in each group, then fit the model in all groups allowing all parameters to be free, and then test for invariance of the factor loadings and intercepts? I have tried to fit the a priori factor models in each group but I have received an error message that indicate that the latent variable covariance matrix is not positive definite. I have also received error message that there are empty cells in the bivariate table of one of the models. To overcome this problem, I was thinking of estimating the factor models using data from the entire sample and save the factor scores and then conduct a multiple group latent variable path model. Would this method seem in anyway plausible? Are there any references I could consult on this issue? Thank you in advance. 


It sounds like you should start with an EFA. I don't think the approach using factor scores is a good idea. If you receive messages like report, you should send your input, data, output, and license number to support@statmodel.com. 


Hi Linda and Bengt and others: I have 2 questions to start regarding MG analysis. I am performing MG analysis for a sample N=1012. I have 1 exogenous latent factor and 3 endogenous latent factors (plus several observed variables, including 2 observed categorical DVs). Question 1: Writing syntax to set factor means to 0.I thought I had written the syntax properly, but when I ran tech 4, I found I was not getting the latent means equal to zero for step 1, and as I review the UG, I am unsure if I am writing the syntax re: the intercepts correctly as well. My syntax to set the factor means to 0 was: [a@0]; [b@0]; [c@0]; [d@0]; I then tried: [a@0 b@0 c@0 d@0] and still did not get the factor means at 0 in tech4. Question 2: For freeing the intercepts of the factors in step 1, I was considering the observed DVs only for measurement invariance and my syntax was: [x y z]; [a b c]; [q r s]; is this correct? Or am I supposed to be setting the intercept of the factor mean to 0? Many thanks, Sue 


It sounds like you have covariates in your model. In this case, you are fixing the intercepts of the factors to zero not the means. The setups for testing measurement invariance can be found in the Topic 1 course handout on the website. See multiple group analysis. 


As always, so appreciative of your rapid feedback. Thanks for the slidesthey are very helpful. I revised my syntax for step 1 to put the factor means set to zero in the MODEL command and not the g2 command (a la slide #205). I am including mean structure in my analysis. When I add tech4, my latent means are not = to zero. Is this correct? Thanks Linda, Sue 


If you have covariates in your model, the means will not be zero even if you have fixed the intercepts to zero. 


Thank you again. I appreciate your assistance. Sue 


I tested invariance of loadings across two groups (preschool vs no preschool) in the CFA model with two constructs at two times. The results showed I cannot contrain loadings. Two questions:  I would like to test the invariance of path coefficient in the structural model...can I do that even though the loadings across two groups cannot be constrained (I do have configural invariance)  if I report the loadings for each group separately I should report undstd estimates, right (because std are not really comparable)? Are the unstd comparable across groups? E.g. preschool group has an unstd loading of 0,54 and nopreschool groups' same loading is 0,80  can they be compared in terms of size? 


 No, because the path coefficients correspond to different latent variable constructs  Yes, use unst'd; they are comparable across groups  that's what you are testing. 

RDU posted on Sunday, October 04, 2009  7:48 pm



Hi. I am trying to establish measurement invariance for a 7item scale that is examined across two independent samples. The scale is made up of a mix of continuous and categorical items. So my question is whether Mplus allows me to cross validate my CFA measurement model or check to see whether the model's invariant across the two samples? I would imagine that if it could be done, I'd have to use a multiple group CFA analysis to check for configural, weak, and strong factorial invariance. Though, I am unsure of how to use a multiple group analysis when there are 2 separate samples involved. Thanks. 


Multiple group analysis is designed for independent samples where you want to test that certain parameters are equal across groups  see Chapter 13 in the UG for how to do this. It is not clear if your 2 samples constitute samples from the same population so that you are interested in cross validation or represent samples from different populations like male/female. Multiple group analysis is typically used for the latter. It doesn't matter if you have taken 2 independent samples or just 1 sample where you then divide into males/females  given independent observations, you still end up with independent samples. 

Tom Cheong posted on Thursday, November 12, 2009  3:46 pm



I performed a MG analysis with two groups and referenced notes on Topic 1 and would like to ask the following questions: 1. When allowing all parameters to be free, is it correct that one has to fix the factor means of second group to be zeroes in Mplus while letting both the factor loadings and intercepts to vary? On slide 205, it indicates that only the factor loadings are freed? I gathered from Slide 206 that the df of the "together model  males and females" (52) is equal to the sum of the two individual models (26 each) so the means of the second group should be fixed to zeroes? Correct? Actually, when I just freed the factor loadings and the intercepts, the model did not run. Then does it mean not all parameters are not free? 2. It is because the factor means for both groups have to be zero when looking at factor loading invariance, one would use the nomeanstructure statement on slide 207 ? I tried with the default (meanstructure) and set the factor loadings to be invariant and the factor means for the second group to be zero and got identical results. 3. It is correct that once the intercepts are fixed to be the same for the groups, the factor means are automatically set to be zerothis is what I got even though I did not fix the factor means to zero. I read from Slide 210 that the no. of factor means was taken into consideration when computing the Chisquare difference. Thank you very much. 


I think you are looking at an old version of the Topic 1 course handout because the slide numbers do not match what I have. The models to be compared are given on page 399 of the most recent user's guide which is on the website. Inputs for each of these models are given in the Topic 1 course handout. To answer your questions, you need to send the outputs you refer to along with the questions and your license number to support@statmodelcom. I can't follow your questions. 

Tom Cheong posted on Thursday, November 12, 2009  7:28 pm



Thanks for the reply! Sorry for referring to an old version of the handout and my unclear questions. I looked at the page of the user's guide you referred to, applied them to the example data set I have, and was able to follow the procedure, get, and understand the results. I would like to ask a question re. the factor mean with reference to the guideline on p. 399: Why are the factor means to be fixed at zero in Steps 1 and 2 and freed in Step 3? It seems that with intercepts VARIANT, the factor means have to be equal? Could one let the factor means vary in Step 1 as well? Thanks a lot. 

Tom Cheong posted on Thursday, November 12, 2009  8:06 pm



I forgot to mention what motivated the question. To look at population heterogeneity, one looks to see whether the factor means and covariances differ. My understanding of MG analysis is that it first starts with investigating measurement invariance and then proceeds to examining population heterogeneityif this is correct, why would factor means be held invariant in the first and second steps during measurement invariance assessment? Thank you. 


Factor means need to be fixed at zero in all groups when intercepts are free for the model to be identified. If you go forward in the handout, you will find a test of factor means being equal. To do this test factor means are zero in all groups versus factor means being zero in one group and free in the other groups. 

Tom Cheong posted on Friday, November 13, 2009  12:06 pm



Thank you, Dr. Muthen. 

Nicolas M posted on Saturday, June 26, 2010  2:25 am



Dear Professors Muthèn, I have 5 indicators representing health. I tested the measurement invariance for the factor across 5 groups using the MULTIGROUP option and the constrained model (same thresholds and loadings across groups) was clearly rejected by the DIFFTEST procedure. Actually, my hypothesis is that one of the indicator (a subjective evaluation of health) is not evaluated in the same way by the individuals in each group. Could I test this by doing a path analysis (multinomial regression) of this indicator on the others (that are objective measures of health)? I did this by specifying a unconstrained regression model (with different thresholds for the dependent variable across groups) and then a constrained one (same thresholds across groups). Again, using DIFFTEST, the constrained model is rejected (p<0.05). Does it sound like a reasonable approach to you and does it allow me to conclude that subjective health is evaluated in a different way in each group? 


You can test for partial measurement invariance using multiple group analysis as described in the Topic 1 course handout under multiple group analysis. 


I wonder whether multiple group multilevel SEM (MG MSEM) can be applied to my data of three consecutive years. The data of each year have students' responses to same or similar background variables and IRT scaled math scores with same mean and SD, as well as principals' responses to same or similar schoollevel variables. The problem is that in each year students were sampled by twostage stratified cluster method which is being used in PISA and TIMSS. So, students and schools sampled in each year are not the same. In my opinion, however, they are representative samples of national population of each year. Moreover, background variables and math scores of each year seem comparable. I was thinking that each year's students and schools can be formed as an independent group and the three groups can be campared using MG MSEM. I guess MG MSEM for my data isn't a good match. Then,what is your opinion? How can I statistically compare the threeyear data using MSEM if MG MSEM isn't possible? Thanks in advance! 


It sounds like you are interested in change over time. In this case, the same individuals must be measured at multiple time points using the same measurement instrument. In your case it sounds like both the sample and the measures change over time. I think it would be hard to make a case for making a comparison in this case. 


Thanks for your prompt clarification! 

jessy posted on Friday, November 26, 2010  10:34 pm



Dear Dr. Muthen, I have a simple question. From a previous discussion and an answer provided by you and Bengt, I realize that ordinal variables, even if they are at 3 levels or more can be treated as continuous in the presence of MLR estimator. (these are independent variables by the way as my dependent variables are scale) However my reviewers want more justifications. Do you possibly have any article/s in mind I can read and quote that could provide me with such justification? OR any other information that would be helpful in this case? Sincerely, Jessica 


In all regression books, you will see that observed exeogenous variables, covariates, are either continuous or binary and in all cases are treated as continuous in the estimation of the model. If you have a threelevel ordinal variable, you can either treat it as continuous or create two dummy variables. 

jessy posted on Saturday, November 27, 2010  10:46 am



Thank you! 


I am running a path analysis and I want to see whether the coefficient of the variable ‘IP’ on the variable ‘rad’ is different for small versus large firms. I have run the model below (with default settings) and obtain a Chisquare value of 7.326 and 6 degrees of freedom. If I force the coefficient of ‘IP’ on ‘rad’ to be equal across both groups (by adding (1) right after ‘rad ON IP’), then I obtain a Chisquare value of 7.885 and – again as in the unrestricted model  6 degrees of freedom. I order to compare the fit of both models, I would have to subtract the Chisquare values, and also the degrees of freedom. However, the degrees of freedom are the same for the restricted and default model. How do I deal with that? Thank you in advance for your help, TITLE: multigroup DATA: FILE IS C:\CLEANED_verkort.dat; VARIABLE: NAMES ARE pm04 pm01 sz IP intRD extRD hi rad lic class; USEVARIABLES ARE pm04 pm01 IP rad lic intRD ; CATEGORICAL IS lic IP; GROUPING IS class (0 = small 1 = large); missing are .; ANALYSIS: parameterization = theta; MODEL: rad ON IP; rad ON lic intRD; lic ON IP; pm04 ON rad lic IP pm01 intRD; IP on intRD; MODEL INDIRECT: rad ind IP intRD ; OUTPUT: stand, modindices; 


Please send the two outputs and your license number to support@statmodel.com. 


I found variance between 2 groups on two paths within a structural model so I ran a partially constrained model. this partially constrained model differs from the fully constrained model suggesting group moderation. I want to report on the standardized structural path coefficients for the partially constrained model. When I look at the output, it looks like the unstandardized path coefficients are the same across the two groups except for the paths I allowed to vary. However, when I look at the standardized path coefficients they all differ between groups even those that should have been constrained across groups. Is this accurate? And then what standardized path coefficients do I report for this multiple group analysis. 


Standardized coefficients are functions of not only the slopes but also the variances of the variables. They are therefore not invariant unless the variances are. With group comparisons, it is better to report unstandardized coefficients. 

anonymous posted on Sunday, July 07, 2013  3:04 pm



I'm testing a model predicting variables Y1Y6 from variables X1 and X2 and interested in whether gender moderates these paths. I tested a multiple group model (male and female) and used the SatorraBentler scaled X2 difference test, testing each path individually because I really would expect based on theory that not all of the paths would be moderated by gender. However, the final modelwhich includes 5 paths that are different across gender has a poor SRMR (.191) with otherwise strong fit statistics. However, a multiple group model that fixes all of the paths to be equal across gender has a strong SRMR (.027) even though the SatorraBentler scaled X2 difference test suggested than more then half of the paths were not significantly different for males and females. Does it make sense for the SatorraBentler scaled X2 method to lead to a potentially worse fitting model? Does this suggest that perhaps moderation should be tested instead at the model level? I'm not sure what to make of the worsening of the SRMR in this case. 


Does your model fit well in each group when tested separately? 

anonymous posted on Monday, July 08, 2013  8:40 am



I apologize, in my post above I meant to say: "a multiple group model that allowed all paths to be freely estimated has a strong SRMR (.027) even though the SatorraBentler scaled X2 difference test suggested than more then half of the paths were not significantly different for males and females." So this was essentially a multiple group model without fixing any of the paths. And yes, the model does fit well when each group is tested separately. 


I don't think these findings contradict each other. 

anonymous posted on Monday, July 08, 2013  1:03 pm



I'm sorry, I think I'm confused. Why would a final model that reflects which paths were and were not significantly different across gender according to the SatorraBentler scaled X2 difference test (some paths were found to differ based on gender using the SatorraBentler scaled X2 difference test and some were not so in the final model some of the paths were fixed and some were not) then have a poor SRMR value when a model that is inconsistent with the findings of the SatorraBentler scaled X2 difference tests has a strong SRMR? 


When nothing is held equal across groups, it is the same as running each group separately. You said that the model fit well in each group so I am not surprised that a multiple group analysis with no constraints would fit well. And I'm not surprised that a model with constraints does not fit as well. This question may be more appropriate for a general discussion forum like SEMNET. 

Back to top 