Message/Author 

Daniel K posted on Thursday, August 12, 2010  11:14 pm



Dear Dr. Muthen What are plausible values of latent variables for? The values are simply factor scores? Then, in LGM, the values are individual intercept and slope values (like EB in HLM)? Instead of latent means analysis, can we simply compare mean plausible values? Thank you very much for your kind consideration. Dan Kim 


Plausible values are factor scores. I would not use factor scores as their means are not the same as latent variable means in a latent variable model. 


Dear Dr. Muthen, I am using complex data (PISA). There are 5 plausible values for test scores in math and reading. I am estimating a path model, where reading is an indep. var and math is the dep. var. I am using the type = imputation command in conjunction with the cluster, weight and complex command. 1.) Is it necessary to use 25 Data sets (i.e.: Dat1 = mathpv1, readpv1; Dat2 = mathpv1, readpv2; ...; Dat6 = mathpv2, readpv1, ...) or would it also be correct to use just 5 data sets (Dat1 = mathpv1, readpv1; Dat2 = mathpv2, readpv2, ...)? 2.) What would be when I further use multiple imputation for the other variables (x1  x10) of the model? Are 5 data sets (mathpv1, readpv1, x1imput1, x2imput1, ...) enough? Or do I also have to create data sets for each combination of imputed values? Best regards and thanks Christoph Weber 


I think you need to direct this question to someone who is knowledgeable about the PISA data. 


Thanks, but is it correct to use type=imputation to analyse plausible values? Christoph Weber 


Yes. And typically you would have imputed data sets where each includes all your latent variables (math and reading in your case). So you would have say 5 of those, not 5 for one of the latents and 5 for the other. 


Thanks, I have further another question. I'm running a path model with the data. My dependent variable (y) is a binary var. The other variables are continuous. y ON x1 x2 x3 x4 x5; x1 ON x2 x3 x4 x5; x2 ON x3 x4 x5; x3 ON x4 x5; I use MLR Estimation and request the stdyx solution. How are the Coeff. standardizes? How are these stand. coeff. interpreted? Is R² something like Pseudo R²? And I don't get exp(b)  coefficients? Thanks Christoph Weber 


Standardization is as usual, described in the UG  with the exception that with a categorical DV, the residual variance is either 1 (probit link) or pisquare/3 (logit link). Rsquare uses the usual formulas and these same residual variances, as advocated by McKelvey and Zavoina (1975) and also in books on categorical data. You should get exp(b), but if you don't, define them in Model Constraint as New parameters. 


Thanks for your help Christoph Weber 


Hi, I've got a little question. In DATA IMPUTATION command we could find option for rounding number of decimals for imputed continuous variables (ROUNDING=). But how to set the number of decimals for plausible values i.e. imputations for latent variable? When I put name of latent variable in rounding option (for instance ROUNDING = f1 (5); ) it does not work. Thank You Artur 


There is no such option for plausible values. 

Ksnow posted on Tuesday, July 03, 2012  10:42 pm



Dear Dr. Muthen ¡G I am doing analysis about bifactor. I want to get the plausible value of bifactor model. Can Mplus do that? I have tried to add the plausible value code in the bifactor model. However, it doesn't work? Am I wrong or the Mplus can not do that¡H 


Please send the output and license number to support@statmodel.com. 

Jan Zirk posted on Tuesday, September 25, 2012  6:14 pm



Dear Bengt or Tihomir, In Asparouhov & Muthen (2010; Plausible Values for Latent Variables Using Mplus) you mention the plausible values (pvs) but when they are extracted from a categorical variable or a latent factor MPlus gives us mean median, SD and CI values; did you mean in Table 3 mean or median pvs? 


Table 3 is the mean pvs, but the median will give the same result because the posterior distribution for the plausible value is normal in that particular example. 

Jan Zirk posted on Thursday, September 27, 2012  1:37 am



Thank you very much. 


Dear Dr Muthén, In one of my PhD studies I've made secondary analysis on Swedish PISA data. The SEM models were tested with Mplus using the maximum likelihood parameter estimator (MLR) with the twolevel complex analysis type. PISA 2009 data was used. When I performed the analysis I was not aware of the possibility to use all 5 plausible values offered for each student. Instead I used one of the plausible values and tested the models with each PV at a time and compared the five outputs (that did not differ much). However, one of the anonymous reviewers of my manuscript informed me about the possibility to perform the testing of the CFA models and estimating the parameters using all the five PVs in Mplus in order to get correct standard errors (since groupdifferences are in focus). How is this done? Should I use type=imputation as referred to above by Christoph? What will the input instruction look like when it is supposed to call for five different data files? Is it all done in one analysis? Thanks in advance! Best regards, Maria Rasmusson 


Yes, use TYPE=IMPUTATION and you will get averaged estimates and correct SEs and chi2 using all the imputations. See UG ex 11.8, part 2. You find the data, including the "implist" file on our website under the User's Guide examples. 


Tusen tack för hjälpen! Thanks a lot. It seems to work fine! Best regards, Maria 


hi there, we're scratching our heads over this output message we've been getting: *** ERROR in DATA IMPUTATION command Unknown option: PLAUSIBLE are there circumstances under which even proper use of the plausible command would produce this error? or perhaps somehow we are using it incorrectly? a slightly shortened version of our input file is below, in case that helps. any insight much appreciated! we've tried a number of permutations of the below, but keep getting the same message. we're using mplus 7. data: file is informant2.dat; variable: names are [quite a few]; IDVARIABLE = id; usevariables are avfmps12 avfmps16 avfmps19 avfmps24 avfmps30 fmps12 fmps16 fmps19 fmps24 fmps30; missing are avfmps12 avfmps16 avfmps19 avfmps24 avfmps30 fmps12 fmps16 fmps19 fmps24 fmps30 (99); categorical are fmps12 fmps16 fmps19 fmps24 fmps30; analysis: estimator = BAYES; model: [is a complicated factor structure] DATA IMPUTATION: PLAUSIBLE = hplau.dat; SAVE = hplau2.dat; output: TECH1 TECH8; 


PLAUSIBLE= is not an option in the DATA IMPUTATION command. This was changed in Version 7 to SAVE = FSCORES(10); in the SAVEDATA command. So the change is SAVEDATA: FILE IS hplau.dat; SAVE = FSCORES(10); where 10 is the number of imputations. See the Version 7 User's Guide. 


thanks, bengt! it works fine now. that will teach us to use version 7 while looking at the version 6 manual! 


Dear Dr. Muthen, I have a quick question regarding Ex 11.7. Factor scores for the latent variables f1, f2, and f3 would be obtained and can be used in secondary analysis. My question is that: Do I need to include important background variables (pointing to indicators) for better estimated factor scores? Do you have any reference? I appreciate your reply in advance! HsienYuan 


If the factors are wellmeasured by several good factor indicators, you don't need to include background variables. See the special issues of JEBS and JEM on NAEP. 

Dan Cloney posted on Monday, October 06, 2014  5:45 am



Hi, I have been provided two datasets that include information on the same participants. The first is a dataset with observations on a number of variables that include some missing values. The second is a set of 5 plausible values for a proposed new latent indicator. There are plausible values for a subset of the participants observed in the first dataset. Can you suggest the best approach to incorporate these into a single imputation analysis? Should I estimate an arbitrary model with the first dataset, then manually add the PVs to the saved imputed datasets, and then estimate the final model? 


I don't know what to recommend here. It sounds like the first data set has more subjects than the second, but the second has more variables  the latent variable's plausible values. Not sure what the final modeling would be. 

Dan Cloney posted on Monday, October 06, 2014  2:52 pm



Hi Bengt, Thank you for your response. You are right, the first data set contains more subjects than the second. e.g., u11, u12, u13...u33 and 3000 subjects long, with some missing data. The second data set contains fewer variables that the first: 5 PVs for one latent variable. e.g., f1_pv1...f1_pv5 and 2000 subjects long. The final model is intended to be a growth model, that includes f1 as a (timeinvariant) covariate. Does that extra information give you any ideas? 


I assume that the two datasets have some observed variables in common. And that you don't have the observed indicators of the f1 factor in either dataset. 

Dan Cloney posted on Monday, October 06, 2014  5:02 pm



That's right, the observed indicators of f1 do not exist in either data set. The only element common to both data sets are the subject and cluster IDs. 


Then I think all you can do is analyze the n=2000 subjects in common to the two data sets, merging the PV data sets with the n=2000 subset of the other data set to get those observed variables. Then use Type=Imputation data input. 


Hi Bengt and Linda, we are running estimates (means) across 20 plausible values using TYPE=IMPUTATION for one variable in our data set, but are not getting standard errors for the mean score on the variable created through the combination of 20 p.v.'s. Can you help us know how to get the standard errors? We did not specify the variable created from the 20 p.v.'s as latent. Do we need to? Or is there a specific output command that we need to utilize in order to get the standard errors? We ran the analysis with gender as a grouping variable, and just receive this output (with no standard errors): ESTIMATED SAMPLE STATISTICS FOR MALES Means MATHCOMP ________ 1 218.521 Covariances MATHCOMP ________ MATHCOMP 1413.018 Correlations MATHCOMP ________ MATHCOMP 1.000 ESTIMATED SAMPLE STATISTICS FOR FEMALES Means MATHCOMP ________ 1 225.236 Covariances MATHCOMP ________ MATHCOMP 1283.463 Correlations MATHCOMP ________ MATHCOMP 1.000 


Take a look at User's Guide example 13.13. This is what you will have to do. The input file should look something like this. DATA: FILE IS Listof20FileNames.dat; type=imputation; VARIABLE: NAMES ARE MATHCOMP g; GROUPING IS g (1 = male 2 = female); MODEL: MATHCOMP; [MATHCOMP]; MODEL female: MATHCOMP; [MATHCOMP]; 


Hello, we specified out syntax as above, but are still not receiving SEs (see select input and output below). Do we need to specify any different options to receive SEs? We cannot send the data because it is restricted use. DATA: FILE IS "G4reading2021215list.txt"; type=imputation; VARIABLE: NAMES ARE dsex origwt srwt01srwt62 mathcomp; Usevariable is mathcomp; MISSING ARE .; WEIGHT IS origwt; REPWEIGHTS = srwt01srwt62; GROUPING IS dsex (1=males, 2=females); ANALYSIS: TYPE = COMPLEX BASIC; REPSE = JACKKNIFE2; MODEL: [mathcomp]; mathcomp; MODEL females: [mathcomp]; mathcomp; OUTPUT: Sampstat STDYX;  (from our output) NOTE: These are average results over 20 data sets. ESTIMATED SAMPLE STATISTICS FOR MALES Means MATHCOMP 1 218.521 Covariances MATHCOMP MATHCOMP 1413.018 Correlations MATHCOMP MATHCOMP 1.000 ESTIMATED SAMPLE STATISTICS FOR FEMALES Means MATHCOMP 1 225.236 Covariances MATHCOMP MATHCOMP 1283.463 Correlations MATHCOMP MATHCOMP 1.000 


The standard errors are in the results section with the title "MODEL RESULTS". 


Dear Tihomir, I do not see the SE estimates. Our entire RESULTS section of the output is below. Do we need to select an estimation type other than COMPLEX BASIC? Should we be using TYPE = COMPLEX instead (not specifying BASIC)? Is there an Output option that we need to select, in order to see the SEs? Thank you. RESULTS FOR BASIC ANALYSIS NOTE: These are average results over 20 data sets. ESTIMATED SAMPLE STATISTICS FOR MALES Means MATHCOMP 1 218.521 Covariances MATHCOMP MATHCOMP 1413.018 Correlations MATHCOMP MATHCOMP 1.000 ESTIMATED SAMPLE STATISTICS FOR FEMALES Means MATHCOMP 1 225.236 Covariances MATHCOMP MATHCOMP 1283.463 Correlations MATHCOMP MATHCOMP 1.000 DIAGRAM INFORMATION Mplus diagrams are currently not available for TYPE=BASIC. No diagram output was produced. Beginning Time: 14:25:46 Ending Time: 14:34:52 Elapsed Time: 00:09:06 


Tihomir, we are running the analyses without specifying BASIC and are now receiving the SEs. Many thanks. 


Yes  remove BASIC. 

Back to top 