Message/Author 


When applying a MIMIC model researchers have typically tested first whether items are unidimensional. So for example in the Gallo, Anthony and Muthen (1994) paper 15 depression symptom items when subjected to a EFA were found to load on to a single factor (depression). My question is what happens when you are working with a depression scale such as the CESD or BDI which when factor analysed (EFA) will invariably produce three or four factors (eg depressed affect, positive affect, somatic). Does it make any sense to model this as a second order model and then carry out the MIMIC analysis. This means we would be saying that for the same level on the second order factor of depression one group (say women) are more likely to endorse a particular item than are men. Does this sound plausible or would it be better to go back to the scale and remove items with a view to producing unidimensionality. Any views would be very much appreciated. 


It is not necessary to have a single dimension to study direct effects using a MIMIC model. If you have four factors, you can regress them on the background variables and also regress the factor indicators on the background variables to study direct effects. 

Anonymous posted on Tuesday, September 19, 2000  3:00 pm



1. In MIMIC modeling, could the cause/background variables (X) be categorical? The examples in the MPlus manual for MIMIC models do not contain one for categorical X. 2. Can we combine a MIMIC model with a multilayer structural equation in MPlus? For example, is it possible to have the following: CATEGORICAL ARE y1y12 x1x3; f1 BY y1y2; f2 BY y3y5; f3 BY y6y8; f4 By y9y10; f5 BY y11y12; f1 ON x1; f2 ON x2; f3 ON x3; f4 ON f1 f2 f3; f5 ON f4; 

bmuthen posted on Thursday, September 21, 2000  8:52 am



Yes to both questions. The distribution of the covariates does not matter because the model is for the outcomes as a function of the covariates. And, factors can be regressed on other factors and the model still have all the usual MIMIC features including direct effects from covariates. As long as the model is identified and makes sense. 


Is it possible to test for factor loading invariance across groups using a MIMIC model? Or does that have be done using a multigroup model? 


You cannot compare models with and without factor loading invariance using the MIMIC model. There is no way to relax the assumption that the factor loadings are the same for two groups, say males and female. Only the intercepts can vary. I think the only way to test factor loading invariance is multiple group analysis. 

Anonymous posted on Thursday, December 20, 2001  4:12 am



I'm trying the MIMIC model with categorical data. I would like to examine the regression of the secondorder factor model of cognitive test on background variables gender, age. Because the gender (1=male/2=female) is binary, I used "CATEGORICAL" command to treat gender as categorical variables in the model. However, following error message was shown, and I could'nt go ahead with the analysis. *** ERROR in Variable command CATEGORICAL option is used for dependent variables only. GENDER is not a dependent variable. I don't think that the Mplus could not treat the categorical independent variables. Should I use another analytic methods like multiple group analysis? 


The CATEGORICAL statement is used to identify dependent variables that are categorical. The scale of the independent variables can be categorical or continuous but this information is not important in the estimation of the model. All you need to do is remove the independent variables from the CATEGORICAL statement. 


I am estimating a single group MIMIC model with categorical variables. I noticed that the model fit improves a great deal when analysis type=MEANSTRUCTURE as opposed to analysis type=GENERAL. I found this by accident but I am not sure I understand exactly what the implications of it is. Would you please explain what meanstructure single group MIMIC model means? Thanks.  Mesfin 


If you have unstructured means in your model, you should get the same chisquare as when you have no means. I just ran a categorical MIMIC to confirm this. If you are only adding MEANSTRUCTURE and doing nothing else, you should get the same chisquare. If you send your outputs, I will be happy to see what the explanation is. 

Anonymous posted on Tuesday, October 14, 2003  5:58 am



I am conducting a CFA with bacground variables to test my singlefactor model(n=1358). The measurement model has ten indicators and are regressed by three background variables (sex, age, diagnosis). I am estimating the parameters using the WLSMV for binary and categorical data, because the indicators are dichotoumous and categorical. When I run the analysis, the following error message was shown: *** FATAL ERROR VARIABLE SEX CAUSES A SINGULAR WEIGHT MATRIX PART. THIS MAY BE DUE TO THE VARIABLE BEING DICHOTOMOUS BUT DECLARED AS CONTINUOUS. RESPECIFY THE VARIABLE AS CATEGORICAL. As a result, I can not admit the correlation between sex and age. Of course, I know that dependent categorical variables does not need to be declared as continuous. I don't know what to do to solve this problem. Any suggestions would be appreciated. 


Please send the complete output to support@statmodel.com. I need to see how you specified your model. 

yang posted on Friday, April 21, 2006  1:03 pm



I am fitting a MIMIC model, in which the unidimensional latent variable (f) is continuous, while all of its indicators (u1u12) are binary (0/1), and the only one covariate (x) is also binary (0/1). Since I could not find a program ¡°template¡± from the User¡¯s Guide or Handouts, I composed the following codes, but I am not sure whether it is correct. Would you mind to have a look at it? Thanks. TITLE: MIMIC with binary indicators and covariate; DATA: FILE IS "123.dat"; VARIABLE: NAMES ARE x u1u12; CATEGORICAL ARE u1u12; MODEL: f BY u1u12; f ON x; u1u12 ON x; f@1; OUTPUT: standardized modindices (3.84); 

yang posted on Friday, April 21, 2006  1:31 pm



I got a report of problem after running the previous codes: THE STANDARD ERRORS OF THE MODEL PARAMETER ESTIMATES COULD NOT BE COMPUTED. THE MODEL MAY NOT BE IDENTIFIED. CHECK YOUR MODEL. PROBLEM INVOLVING PARAMETER #. The sample size pretty large (>1000), and I am fitting a unidimensional struture. What's wrong? Thanks a lot. 


I see two problems. You have set the metric of the factor twice. Once because the default in Mplus is to hold the first factor loading to one to set the metric of the factor. In addition, you have fixed the factor variance to one. See the BY statement in the user's guide for a discussion of this. The identification problem is because you cannot identify a model with all of the direct effects. A better way to do this is to use the statement: u1u12 ON x@0; and ask for modification indices to find large direct effects. 

yang posted on Friday, April 21, 2006  2:50 pm



I see. Thank you very much! 


I am estimatig a onefactorMIMICmodel with binary xvariables and categorical yvariables in order to explore heterogeneity. In the first model all relations between xvariables and yvariables are set to zero. Only relations between the factor and the xvariables are estimated. With respect to modificationindices a second model is estimated by relaxing the restriction and setting one relation between x and yvariable free. Doing so the paper Muthén & Asparouhov (2002) states that the interpretation of a significant direct effect is that the threshold of one group is biased. But in their model they only dealed with binary outcomes with one threshold. I have categorical outcomes with four/five categories and therefore three/four thresholds. Does in this case a positive significant direct effect mean that all thresholds are biased in the way taukappa? 


A significant direct effect with an ordered categorical outcome applies to all thresholds. 

jenny fan posted on Thursday, June 15, 2006  1:36 pm



Dear Drs. Muthen, I am using MIMIC to investigate DIF effect of some demographic characteristics (x1x3) on the items (y1y10). Besides x1x3, I included some clinical conditions (x4x6) as exogenous variables in the MIMIC model. The quesion is  do I need to create the direct path from x4x6 to the items considering the potential DIF of x4x6 on the items? If we don't create extra direct paths other than for the grouping variables of interest, does it impact the model results and interpretation? Specifically in the codes  f1 by y1y10; x1x6 on f1; to add the direct effect, should I use y1 on x1x3 OR y1 on x1x6 ? Another question is  if all exogenous variables are dichotomous, is it true that multigroup MIMIC is not necessary because multigroup MIMIC requires categorical variables? Thank you for your time in advance. 


You don't need to include direct paths for all of the variables. In fact, the model would not be identified if you did. I suggest adding y1y10 ON x1x6@0; to the MODEL command and run this asking for modification indices. The modification indices will show you where direct effects may be needed. I don't undersatnd your second question. The scale of the covariates is not an issue in model estimation. 

yang posted on Friday, December 15, 2006  7:53 am



Drs. Muthen, How to evaluate/estimate the magnitude of DIF in MIMIC model? Thanks. 


A significant direct effect, a factor indicator regressed on a covariate, indicates differential item functioning. 


I have also encountered the following error message, as previously posted by an anonymous poster: Previous post (October 14, 2003  5:58 am)  I am conducting a CFA with bacground variables to test my singlefactor model(n=1358). The measurement model has ten indicators and are regressed by three background variables (sex, age, diagnosis). I am estimating the parameters using the WLSMV for binary and categorical data, because the indicators are dichotoumous and categorical. When I run the analysis, the following error message was shown: *** FATAL ERROR VARIABLE SEX CAUSES A SINGULAR WEIGHT MATRIX PART. THIS MAY BE DUE TO THE VARIABLE BEING DICHOTOMOUS BUT DECLARED AS CONTINUOUS. RESPECIFY THE VARIABLE AS CATEGORICAL. As a result, I can not admit the correlation between sex and age. Of course, I know that dependent categorical variables does not need to be declared as continuous. I don't know what to do to solve this problem.  I did not see a response posted, was there a solution to this MIMIC model using a dichotomous variable? Thanks. Roger Brown 


I think the problem is that you have put the covariates on the CATEGORICAL list. This list is for dependent variables only. 

Roger Brown posted on Monday, March 19, 2007  11:02 am



Thanks Linda, I didn't have the covariates in the CATEGORICAL list, but did seem to solve my MIMIC problem. I originally ran my problem on my home machine, where I had an earlier version of MPlus. When I just ran the same problem here at work using V 4.1, everything was fine. So, must have been something in an earlier version? I will run these problems on my home machine to confirm my suspicion. Thanks for the response. Roger 


That may be the case. It's always best to use the newest version. 


Hello, I am running a MIMIC model with one dummy covariate(begenl). The model results show that the loadings of the covariate on the two of the factors (MOBILT and PARTIC) seem to be significant (Est./S.E.=4.173 and 2.116, repectively), however, their stdXY are small (<0.120)>0.98). The modification indices suggest that there is a direct effect of the covariate on item FD20 (Est./S.E.=7.506). When I compare Chisq of model with direct effect with that without it is signifficant. Although the chisq test is signifficant and the parameters seem to be signifficant too, the effect of the covariate on the factors and on item FD20 seems small to me. What do you think? Would you say there is non invariance of Item FD20 and population haterogeneity? Estimates S.E. Est./S.E. Std StdYX MOBILT ON BEGENL 0.221 0.053 4.173 0.227 0.112 PARTICI ON BEGENL 0.090 0.043 2.116 0.106 0.052 FD20 ON BEGENL 0.414 0.055 7.506 0.414 0.201 Residual Variances MOBILT 0.935 0.009 101.243 0.987 0.987 PARTICI 0.724 0.025 29.006 0.997 0.997 Thanks! 


The significant direct effect of fd20 on begenl indicates measurement noninvariance. It sounds like you have confirmed that with a chisquare difference test. For a binary covariate, the standardized estimate should be divided by the sample standard deviation of the covariate. Then it will represent the change from one category to the other rather than a standard deviation change. 


Thanks! 


Greetings, I am fitting a onefactor MIMIC model. All indicators are binary (these are items and some have DIF) and I'm using the IRT parameterization with MLR. There are 6 binary covariates. One for gender (1 = female), and 5 dummy indicators to code a 6category nominal ethnicity variable (white is the reference group). Items with DIF are regressed on all 6 covariates (as is the factor). In my final model, there is one threshold parameter estimate for every item. For items with DIF, the threshold depends on the group. My question concerns how to interpret the estimated threshold for an item with DIF. Is it for when all covariates = 0, which would be white men? Or something else? Regards, CMW 


The threshold printed in the output for for all x's equal to zero. If you are interested in a threshold for a particular set of x values, you would need to compute that by hand. 


Hi Linda, in a previous post you state: "The CATEGORICAL statement is used to identify dependent variables that are categorical. The scale of the independent variables can be categorical or continuous but this information is not important in the estimation of the model". My question is why? In a type I (fixed) regression the dichotomous/ordinal/polytomous exogenous variables do not create a problem because they are not random variables. In SEM however they are random and when using normal theory ML they are supposed to follow a normal distribution. LISREL, for instance, has a FI option on the model line where all exogenous variables can be configured as having fixed effects as in a type I (fixed) regression. Could you please explain how does Mplus work? Thanks in advance. 


To be more clear about what I said, in regression covariates can be binary or continuous. Both binary and continuous covariates are treated as continuous variables in model estimation. In LISREL using the FI option and in Mplus with TYPE=GENERAL for continuous outcomes, the means. variances, and covariances of the exogenous observed variables are fixed at their sample values. This is done because in this case if they were estimated using ML, they would be estimated at their sample values. 


Thanks Linda  what happens if I use MLM estimation instead? 


Same thing. 


Thnx again. My probelm is that I have a MIMIC model whith covariates that are ordinal. In particular Age, which is coded as follows: 1=under 18 2=1825 3=2630 4=3135 5=3640 6=4145 7=4650 8=5155 9=4560 10=6165 11=over 65 How do I model such variable where scale intervals aren't the same size? 


When you have a covariate like that if you don't want to treat it as continuous, you need to create 10 dummy variables just as in regression? Covariates in regression can be binary or continuous. 

wenjun zhong posted on Tuesday, September 30, 2008  3:28 pm



Hi Linda and Bengt, I met a question with my MIMIC models that I can not figure out by reading the posts. I'm using Mplus version 4.21. I want to check whether age sex and other indicators can have effects on the selfreported hearing, vision and other symptoms. I have three factors. When using age, sex and education as the indicators, the MIMIC model fit well: CFI:0.927, TLI:0.913, RMSEA=0.047. No warning or error messages. However, when I further add another indicator (general health score), I got a warning: "the residual covariance matrix is not positive definite. this could indicate a negative variance/residual variance for an observed variables..." And it indicated that the problem involving one item "hearing problem". In the output, the residual variance for this item was 0, and the Rsquare was "undefined". From the correlation matrix output by Mplus, I found that this item had high correlations to item "hearing aide (yes, no)", coefficient=0.817, and item "ears problem", coefficient=0.793. 

wenjun zhong posted on Tuesday, September 30, 2008  3:28 pm



Are these correlations the polychoric correlation? I checked the items correlation (spearman), they were not that high (<0.4). If these high correlations are the causes for the 0 residual variance for item "hearing problem", why the program went well when I only use age, sex and education as the indicators? How can I fix this problem? Thank you very much!! Wenjun 


Please send your files and license number to support@statmodel.com. 

RDU posted on Sunday, December 07, 2008  4:03 pm



Hi. I am trying to run a MIMIC model using ordinal indicators with 2 continuous factors. The estimation method is the default of WLSMV. I know that in MIMIC models the covariates used to predict both the latent factors and the observed indicators are usually binary(0/1). Though, I was wondering how one would treat a combination of binary and continuous covariates? Would the continuous covariates be specified such that their residual variances are set to 0 (i.e., factor1 on covariate1@0))? Thank you. 


You treat binary and continuous covariates the same in a MIMIC model. It is not necessary or even recommended to put a factor behind the covariate. You would simply say: f ON x1 x2; y1 ON x1 x2; if x1 is binary and x2 in continuous. 


Drs. Muthen, In the Ex.11.1, let's say X2 is a grouping variable since X2 is a binary variable (0=group1 or 1=group2). How could I control the sample ratio by variable X2 in Monte Carlo study? Or do I need to generate multiple group dataset (e.g., Monte Carlo study example 5.15)? If yes, the grouping variable I generate is 1 and 2. In Monte Carlo study, how could I define this grouping variable as 0 and 1? Thanks in advance. Mark 


If you want to generate multiple group data, you should follow mcex5.15.inp. Grouping information is given using the NGROUPS and NOBS options of the MONTECARLO command. 


How do I test for nonuniform DIF with a MIMIC model in Mplus? I am using a model with several categorical items measuring a single factor and a dummy coded group variable. 


If by nonuniform DIF, you mean testing both intercept and factor loading invariance, this is best done using multiple group analysis. 


Hi, I have a question re: extending MIMIC to structural models. I am analyzing data that includes White youth and youth of color; theory suggests the constructs I am studying will not be invariant across groups. Due to small samples for some racial/ethnic groups and convention in MIMIC modeling, I collapsed youth from different groups into a dichotomous variable – White and nonWhite youth – rather than conduct multiple group analyses to test for measurement invariance. This group membership was used as the external covariate in a MIMIC model. The MIs suggested one direct effect from racial/ethnic group to one indicator – which was significant and improved the fit of the MIMIC model, suggesting DIF for this indicator. The MIMIC model also suggested some latent mean differences; overall, “partial” measurement invariance, I think. I therefore want to attend to racial/ethnic differences when fitting the structural model. I could further subdivide the population into White and nonWhite subsamples, run the structural model for each, and compare the model fit and pattern of relationships for each racial/ethnic subsample. What if I included these paths from the MIMIC model in the structural model, running analyses with the population of White and nonWhite youth? My understanding is that this doesn’t test for group differences in path coefficients. Does this “control” for race/ethnicity and attend to DIF in the structural model? 


I am not clear on the question  if you analyze a single subgroup in what you call a "structural model" (which MIMIC also is) you cannot include paths from a race/ethnic dummy variable because the dummy variable won't have variation in that group. It is correct that MIMIC dummy covariate effects do not moderate slopes  which would be the path coefficients you refer to. 


Let me clarify  my sample consists of White AND nonWhite youth. The exogeneous covariate is a 0/1 variable where 0 = nonWhite and 1 = White. I modeled this covariate in a traditional MIMIC model (CFA with covariates) and am considering doing so in a structural model where I am interested in examining paths between latent constructs while controlling for this exogeneous racial/ethnic group variable as a covariate (recognizing MIMICs are also structural by nature). Because the MIMIC CFA model was "mostly" invariant, it doesn’t seem necessary to then proceed to fit separate structural models in a multiple groups analysis (by racial/ethnic group). Rather, this would entail fitting a structural model with one sample (both White and nonWhite youth) where racial/ethnic group is an exogeneous covariate. I've just read your 1989 Psychometrika paper on this topic. Thank you, Bengt. 

oliver lin posted on Thursday, May 26, 2011  5:02 am



Hi Bengt and/or Linda, when I run WLSMV with the DIFFTEST command, I get the message: " THE CHISQUARE DIFFERENCE TEST COULD NOT BE COMPUTED BECAUSE THE H0 MODEL IS NOT NESTED IN THE H1 MODEL. " I want to detect DIF on item 1 ,could you please give me hand? thank you very much. [H1 model] VARIABLE: NAMES ARE group i1i20; USEVARIABLES ARE group i1i20; CATEGORICAL ARE i1i20; MODEL: f by i1i20; f on group; i1 on group; SAVEDATA: DIFFTEST is deriv.dat ; [H0 model] VARIABLE: NAMES ARE group i1i20; USEVARIABLES ARE group i1i20; CATEGORICAL ARE i1i20; ANALYSIS: DIFFTEST is deriv.dat; MODEL: f by i1i20; f on group; i1i20 on group @0; 


It may be the following: i1i20 on group @0; Try i1 on group @0; If this does not help, please send the relevant files and your license number to support@statmodel.com. 

AK22 posted on Tuesday, September 13, 2011  1:56 pm



Can the Std estimate for the direct effect of a binary covarite on a factor indicator be interpreted like an effect size based on Cohen's guidelines? If not do you have any suggestions on how to determine if a statistically significant direct effect has practical significance when your sample size is really large? 


You need to divide the unstandardized estimate with the standard deviation of the factor indicator to get a Cohenlike result. 


Hi I have recently performed a CFA and added covariates that have an effect on the factors (MIMIC). I have four factors and the indicators are ordinal and defined as categorical in Mplus (WLSMV used). I have two question about this model: 1 How must I interpret the coefficients of the covariates regressed on the factors. As usual regression coefficients? and those of dummy created variables when there are various categorical variables that have been coded as dummies? 2 Is it possible to assess the effect of the factor on an observed variable that is binary? I want to study how the factors relate to an outcome variable three months later while keeping in the model the covariates I mentioned in 1 and the measurement part. And one last thing, can I have a logistic type coefficient in that model so I can obtain an Odds ratio with it? Thank you Jaume 


1. The regression of the factor on a covariate is a linear regression. The regression of a categorical indicator on a factor in a probit regression with WLSMV. 2. I'm unclear on the first part of your question. You can have logistic regression with maximum likelihood estimation. 


Let me try to make it more clear. Can I have a MIMIC model with categorical indicators in the measurement part and then add an observed binary variable in the following way? NEWOBSVAR ON F1 F2 F3 F4; Where NEWOBSVAR is the binary variable and Fx are the factors. If this is possible, my question is: is there a way to obtain Odds Ratios for that part of the model without changing the estimation method for the whole model? I hope it is clearer now. Thank you. Jaume 


With WLSMV,you would obtain a probit regression coefficient for the regression of NEWOBSVAR ON F1 F2 F3 F4. This cannot be exponentiated. You would need to use the ML or MLR estimator if you want logistic regression and odds ratios. 


Thank you. But then what would it be the effect on the measurement part? Would I be considering the indicators as continuous? I assume I leave the categorical command as it is now in the program. J. 


You change nothing but the estimator. Maximum likelihood is not only for continuous outcomes. 

AK22 posted on Friday, October 28, 2011  9:28 pm



Does MPLUS output scale reliability so one can calculate a standard error of measurement as a way to compare the difference between a MIMIC model accounting for DIF and a misspecified model? 


I think you are asking about standard errors of factor scores. Yes, Mplus does provide these. 

UM posted on Sunday, November 18, 2012  6:24 pm



Hello, Is it possible for Mplus to compute the VIF to check multicollinearity among covariates in MIMIC models? 


Mplus does not compute the VIF. You can use TYPE=BASIC to look at the correlations among the covariates. 


Dear Drs Muthén, this might a rather trivial question, but I would appreciate your help. I have run a MIMIC model that regresses 9 covariates on a depression factor in a sample with neurological disease using a WLSMV estimator. The covariates are of any kind (binary, ordered categorical, continuous) and can be grouped into diseasespecific (n=3) and diseasenonspecific variables (n=6). The model fits well. I now want to compare the relative contribution of the combined diseasespecific versus the combined disease nonspecific variables for the depression outcome, but I am unsure about how to proceed. Would it be correct to do a Wald test using the MODEL TEST option in the following way? Model: [...] depr ON u1 (p1) u2 (p2) u3 (p3) u4 (p4) x1 (p5) x2 (p6) x3 (p7) x4 (p8) x5 (p9) ; Model test: 0 = (p1+p2+p3+p4+p5+p6)  (p7+p8+p9) ; where p1 to p6 = disease nonspecific factors and p7 ot p9 = disease specific Covariates were coded so that their parameters are all of the same sign (positive). Can you please advice? Best wishes, Seb 


I don't think you can do this adding of regression coefficients because the covariates are all correlated. Instead, perhaps you can try to form 2 factors and see which factor has the largest standardized coefficient. The factors can be either formative or regular. 


Thank you very much for this. I made separate factors for disease specific and nonspecific indicators: Model: depr BY a01a17 ; a02 WITH a03 ; a02 a03 WITH a09 ; a05 WITH a06 a04 ; a07 a14 WITH a17 ; a10 WITH a11 ; a12 WITH a16 ; f1 BY u1u4 x1x2 ; f2 BY x3x5 ; depr ON f1 (p1) f2 (p2) ; Model test: 0 = p1  p2 ; Does this look correct? The standardized coefficients show the expected direction (f1 > f2), which is confirmed by the Wald test (chisq = 11.911, df = 1, p = .0006). So my conclusion would be that diseasenonspecific risk factors contribute more to variation in depression outcome than diseasespecific risk factors. Best wishes, Seb 


You may want to set the factor metric by factor variances @1 instead of factor loadings @1. In this way, your f1, f2 predictors are on the same scale and p1 and p2 are comparable. 


Thank you so much! 

secilarslan posted on Thursday, January 16, 2014  8:50 am



Dear Dr Muthen; I watched Topic 1 and 2 videos. They are very usefull for me. I ran analysis by inputs which you talk about in those videos. I want to ask you Do we use these inputs for detecting uniform DIF? And one more question is Can we talk about an effect size for MIMIC model? Is there any relationship with R squares and effect size? I am studing with Simulated data set. So I must do the same analyses again and again. Is there any way to do these analyses automatically by MPlus program? Thank you for your help. Secil Arslan 


Yes, MIMIC focuses on uniform DIF, that is, for the intercepts/difficulties of the factor indicators. Don't know which effect you are interested in  on the factor or on an item, but you can always describe an effect size as the ratio of a difference divided by its SD. Mplus offers Monte Carlo simulations; see UG Chapter 12. 

secilarslan posted on Thursday, January 16, 2014  11:23 am



Thank you for your answers.I mean the effect sizes which give us the level of DIF on items. Like standardized regression coefficients(R2)in some other methods. 


If you have a binary item you already have a good scale to present your results in: The difference in probability. 


Hello, I am wondering how to interpret significant effects for my tests of measurement invariance in a MIMIC model. Is it correct to interpret significant relationships between my covariates (in this example gender) and factor indicators as: "Holding the latent construct constant, the intercept for item x was .33 points higher among boys than girls?" Thanks! 


Yes. 


Thank you! 

Jason Bond posted on Sunday, June 01, 2014  1:52 pm



Bengt/Linda, I'm trying to get the correct interpretation of direct effects (DIF) on ICCs. In Carol Woods J Psy Behav 2009 paper (Illustration of MIMICModel DIF...), she indicates that, using the Mplus parameterization, negative beta coefs (direct effect of covariates on items) imply tau is smaller for the focal than reference group and she indicates thus that the level of the latent variable required for respondents to respond 'yes' is lower for the focal than reference group (as she says tau is the value of theta such that P(Yes)=.5). However, Muthen, Kao, and Burstein (1991), equation 5 for the difficulty parameter conversion, indicates that (due to the negative sign on the betaj), it is the opposite. Could you help me resolve my confusion? Thanks, Jason 


Our Topic 2 handout, slide 163 shows this in detail. You see that the key term is tau  kappa*x, that is, a direct effect gets subtracted from the threshold. With a negative direct effect this means that the threshold gets bigger. A bigger threshold means that the probability is smaller for u=1 when x=1 as compared to x=0. 


I'm trying the MIMIC model with categorical data using WLSMV, I have 4 indicators and two reflectives variables . My objectif is to obtain a formative score that I can use in an other analysis, can I obtain a score values in Mplus with MIMIC model? what is the command to obtain this model ? I usually used a lisrel to obtain this score but for continuous indicators. thanks 


See FSCORES in the UG. 

Emily Haroz posted on Wednesday, July 16, 2014  4:17 pm



I am trying to look at DIF by country on 15 items of a depression scale and have 9 different countries. Is it possible to use a MIMIC model with categorical data using MLR (due to missing values) and a categorical covariate? Or do I have to dummy code the country variable to do a mimic model? Thank you for your help. 


You need to either dummy code the categorical covariate (if it is nominal) or treat it as continuous (if it is ordinal). In either case you don't put it on the Categorical= list. Or, you can create C*9 groups, where C is the number of categories in your categorical covariate and then use the new Alignment method to analyze those C*9 groups. See our website under Recent Papers. 

Emily Haroz posted on Thursday, July 17, 2014  9:32 am



Thank you Dr. Muthen. I just read about the alignment analysis and looks like it is exactly what I am looking for. Just to clarifyCan this be done with observed indicators that were recorded on a likert scale (0,1,2,3)? Thank you for your help! Very exciting stuff. 


Variables treated as ordered polytomous categorical variables can not yet be handled with alignment. We expect to have this in a few months. 

Back to top 