Message/Author 


Sorry, but perhaps I've answered my own question  I just reran my model setting STARTS = 0 with the same starting values I'd used, specified 100 iterations, and got the identical results. So, I take it that in addition to running the # of models with random seeds, Mplus also runs one model with the specified starting values, and that one happened to give me the smallest LL? If so, what does it mean that that one is not replicated even with as many as 300 random starts? Thanks, Bruce 


Yes on your 1st question. Your 2nd question is hard to answer without seeing the problem run. Sometimes the model is just too complex for the data and doesn't replicate  a simpler model should then be chosen. Sometimes there are messages that not all perturbed runs converged, in which case switching to stscale=1 might help. Sometimes more numerical precision is needed with numerical integration and it helps to increase the number of integration points. 


Thanks so much for your quick reply, Bengt! I think my first posting didn't get posted because I failed to click the correct button after reviewing it, but the results that generated my question were that I got the lowest LL = 3873.278 with the unperturbed starting values, then (asking for STARTS = 300 20, STITERATIONS = 40), got 19 subsequent solutions with the identical LL = 3878.458. So, the solution did replicate for all the models with random seeds, but the one with the unperturned starting values was smaller. (Only 2 out of 300 perturbed starting values did not converge in the initial stage.) I'll try STSCALE=1 and then numerical integration if that doesn't work. Best, Bruce 


Please send your input, data, output, and license number to support@statmodel.com. 

nina chien posted on Friday, June 27, 2008  9:23 pm



In running an LCA with 600 10 random starts, the largest loglikelihood is always the unperturbed starting value (and of course is not replicated). The next 9 best loglikelihoods are identical. Does this indicate the model is unreliable? Thanks, nina 


You may need more random starts. You should replicate the best loglikelihood. If more random starts do not help, please send your input, data, output, and license number to support@statmodel.com. 


Thank you for your prompt reply way last May, Linda. Rather than burden you with unnecessary work, I decided to do more reading and more analyses before bothering you. So, I was able to get the smallest LL of 3874.155 to repeat  twice in addition to the unperturbed solution, with STARTS = 1500 50; STITERATIONS = 100; The two next smallest LL = 3877.816, then the next 45 were LL = 3878.458. Although the solution with the smallest LL interpretable, such results raise the question how trustworthy a solution is with only 3/1500 replications? Doesn't that suggest a local maximum even so? Wouldn't the LL with so many solutions be more reliable? 


What do you mean by 3/1500 replications? Is this a Monte Carlo study? 


Thanks for your fast response! Sorry, wrong term. I mean I got the same smallest LL in only 3 out of 1500 starts, with 2 being random starts and the 3rd being with unperturbed starting values  all with starting values I specified based on a prior model. This was for a 4class GMM. (Is that the right way to say it?) 


If the largest loglikelihood is replicated (note the values are negative), you should be fine. I would not provide starting values. Try it without starting values. 


Right  smallest absolute number, but largest negative number (being closer to one)! Will do it again without starting values but 1500 random starts and see if I get the same results! Thanks! Bruce 


I ran the model as you suggested without starting values, allowing intercept and linear slope variances to differ across classes. (I set quadratic slope variances to zero for the model.) I used 5000 random starts and got the same largest LL AND class assignments as for only 100 random starts, and in both models got the same warning about the covariance matrix in one class being nonpositive definite. This is not the smallest class, but it is small (C4 n=17; the other three classes are C1=215, C2=8, and C3=13). This sort of problem is why I specified starting values before, and solved the problem with the one class by setting slope variance = 0, which seemed reasonable given the tests for the slope variances  all had pvalues < 0.06 except for the problem class, for which the pvalue was 0.945. I want to be able to go to the next step and test whether 4 is better than 3 classes (the plots look interesting and plausible) but can't without getting the model to fit and replicate. It seems to me that the best next step is to use the estimates for the means and variances from this model as starting values, specifying the slope variance as zero for the problem class. However, that's what I did before that led to my question on July 2nd. The model fit then, but with only a very small number of replicated largest LL even with 1500 starts  only two in addition to the unperturbed, specified starting values. Thanks! 


I would first run with the default of classinvariant variances. Then plot the modelestimated mean curve together with the observed individual curves classified into most likely class to see if there is a need for classspecific variance for a class. If so, free say the intercept variance only for that class. Models with all variances class varying can be hard to replicate. Another trick is to force variances to be greater than zero. This is done by labeling a variance parameter such as the random slope variance: s (s); and then use Model constraint: s>0; 


Thanks very much, Bengt. This is very helpful. But in the interest of time  assuming you have more time for a response!  I understand that you are suggesting that I use a GMM with i s & q variances the same across classes (the default model), then examine the actual individual (spaghetti) plots against the mean plots for the classes. If any look like there is withinclass variation not accounted for by the default model, then free up the intercept variances, one at a time, as suggested by the empirical vs est. mean plots, and examine fit for improvement in the less constrained model. Stop when model fit doesn't improve much  say  using the BIC and/OR SABIC, and perhaps the CFI and RMSEA? Also, thanks for the note about how to prevent negative slope variances (a type of Heywood case, right?) if nothing else seems to work. Although I assume that, as with other latent variable models, this strategy would not be as good as fixing a problem leading to the negative variance? 


Regarding your first paragraph  the idea is to see if one class has less individual scatter than the rest. The rest of your statement is ok. Right. 


Thanks very much. I've been working on the problematic data set, starting over with the default model and working my way up through the class numbers to find the model that fits best. The individual spaghetti plot variations around the class mean plots do not look that different in the amount of variation across classes. I have another question now about selecting the number of classes, but I think that should be in a different thread. Thanks for all your help with this set of questions! Bruce 


Hello! I am running a LCA with count variables. When I increased # of classes=5, I got the following error. THE MODEL ESTIMATION DID NOT TERMINATE NORMALLY. ESTIMATES CANNOT BE TRUSTED. I also got the following errors. 97 perturbed starting value run(s) did not converge in the initial stage optimizations. Final stage loglikelihood values at local maxima, seeds, and initial stage start numbers: 100 perturbed starting value run(s) did not converge. Given my STARTS = 5000 100, it basically tells me that none of perturbed starting value [from the final stage] didn't converge. In this case, can I say that the 5 class solution model is too much for the data and then the simpler model [# of classes=4] should be chosen? Thanks!! 


It probably means that the data cannot support as many as 5 classes. But it doesn't mean that the 4class model should necessarily be be chosen. For example, if a model different than LCA is the right model, then reducing the number of classes is not sufficient. As one example of a model alternative, factor mixture modeling may be used, adding a factor to the LCA that explains correlations among items within class. Our web site has several papers on FMM. 

Jungeun Lee posted on Tuesday, June 23, 2009  10:44 pm



Thank you for a quick response!! Just to be clear... the 4 class model is the best fitting model. Does your answer hold the same with this new piece of info? 


Yes. That's what I understood. 

mpn posted on Tuesday, July 06, 2010  8:45 am



Dear Bengt and Linda, I am running an LCA with covariates, using 500+ starts. The lowest LL is consistently replicated but with one of the seeds 'unperturbed'. I cannot find an explanation for this in the User Guide. Could you please suggest a reference, and advise if the following model is acceptable? Regards, Final stage loglikelihood values at local maxima, seeds, and initial stage start numbers: 4213.884 596257 405 4213.884 unperturbed 0 4301.005 140849 515 4302.228 140987 1093 4302.228 211281 292 4302.228 779009 1458 4375.415 50887 389 4377.010 928287 197 THE MODEL ESTIMATION TERMINATED NORMALLY 


The model is estimated once with the default starting values. Then these values are randomly perturbed to obtain other sets of starting values. 

Yuchun Peng posted on Tuesday, February 15, 2011  2:12 pm



Hi Bengt and Linda, I am running a 2cluster LCGA model with 11 binary variables. The warning message I got is like '60 perturbed starting value run(s) did not converge', regardless the starting values and stiterations used. Although the highest likelihood replicated many times. I tried to solve this problem by specifying the scale of the random perturbation to 2 and it worked. Is there anything I need to be aware when specifying a low level scale of perturbation? Thanks Vicky 


By 2cluster LCGA I think you mean an analysis with 2 latent class variables, rather than a 2level model with only 2 clusters. Models with more than one latent class variable sometimes need a more gentle perturbation of the random starts to not get wild starting values. You may want to experiment with also using a little larger value between 2 and the default 5 to make sure you don't find a better loglikelihood. Other than that, it should be fine. 


Hello, I am running exploratory LPA right now and have started with 3 classes. The following is the input CLASSES = c (3); Analysis: TYPE = MIXTURE; I got a number of error messages including the following. 1. Final stage loglikelihood values at local mxima, seeds & initial stage start numbers. 2. Unperturbed starting value run did not converge 3. Best loglikelihood not replicated. 4. One or more parameters fixed to avoid singularity 5. Standard errors of model parameter estimates may not be trustworthy. 6. Entropy is .925 The continuous indicators are decimal numbers because they are proportions. Do you recommended resaling the numbers for eaiser estimation? (for example, one indicator is the proportion of lone mothers in the individuals neighbourhood. Which is being combined with other neighbourhood varialbes t run in the LPA for a latent variable of community adversity). Any suggestions you have would be helpful. ***Melissa 


Please send your output and license number to support@statmodel.com. 


Hi Dr. Muthen, I cannot send my output given that it is government protected data. Do you have any other suggestions? 


You can increase the number of starts to replicate the best loglikelihood. I would need to see the output to comment on the identification message. 


That worked! I had to increase it by a lot, but it worked! Thank you very much. 

John Woo posted on Monday, August 17, 2015  8:23 pm



Hi, a beginnerlevel question here.. The best LL replicated but there were some starting values that did not converge. Is this a problem? I ask because I ran Type=imputation and saw in Tech 9 this message: "Errors for replication with data file ice1.dat: THE MODEL ESTIMATION TERMINATED NORMALLY" When I ran the model using this particular imputed data (ice1.dat), I found that the best LL is replicated but some starting values did not converge. How serious a problem is this? [I used Start = 1000 10] Thank you in advance for your help. 

John Woo posted on Monday, August 17, 2015  8:32 pm



To be more specific (re above), the best LL includes the unperturbed starting value. And only some of the perturbed starting values did not converge. [I see Dr. Muthen's answer for a similar question, but I am still a bit unclear.] Thank you. 


As long as the best logikelihood is replicated, you are fine. Please keep your post to one window. 

Back to top 